How to Fix GoPro Export Error 30

Photo by Fabrizio Verrecchia on Unsplash

In an era where storing memories is more important than anything in the world, GoPro has provided the best camera that exists there. However, sharing those videos has become another concern.

With technology comes failures. The users are encountered with GoPro error 30, which doesn’t allow the GoPro videos to be exported from one location. That’s pretty inconvenient, don’t you think?

Why GoPro Videos Export Error Code 30?

The primary cause of error code 30 is mostly related to the corrupted portion of the video. Sometimes, some part of the video is corrupted that doesn’t allow it to be exported. Other reasons include insufficient storage in the hard drive, the outdated graphics card driver, and the problematic location of import/export.

Workable Solutions to GoPro Video Export Error Code 30

The nature of every problem varies with the device, the storage space, graphics card driver, or Windows update. It is highly suggested that you deal with the problem after the nature of the problem is understood. Only then can we approach the solution and get rid of it.

The latter part of this section takes you on a journey where you are guaranteed to forget about GoPro error 30. Consider all the provided solutions and act on them accordingly.

Check Your Storage Space

The first and foremost solution designed for you works most of the time. It is essential that you check your storage space if you are being encountered with Error 30 again and again. There is several video software in the market whose main job is to permit you to change the default storage location on the hard drive.

But this software needs enough space on the main drive, and when there is not, the error code 30 comes up. In this case, do not worry as we have got you all covered. You just need to move and locate the large or unnecessary files to some other folder from the C drive.

After you have freed some space, restart the system and check if the problem persists. However, if, for some reason, error code 30 decides to show up, you can jump on the next solution carved up for you.

Video Import and Export Location

If GoPro error 30 is haunting you and making your video export complicated, do not lose your sleep over it. Changing the export location of the video can work in your favor.

If an external hard drive is under use to save the exported videos, you may want to change the location. You can do it temporarily to understand the nature of the problem at hand. Follow the steps below:

  1. Change the default location of exporting videos to the internal hard drive instead of the external hard drive.
  2. If the video is successfully exported, again change the location back to the external hard drive.

If you want to throw the Video Export Error 30 out of the window, you may have to re-do the whole procedure mentioned above to import videos. You have to ensure that their location is an internal hard drive before you import the videos.

This solution has proved to be quite futile for error code 30. However, if the problem continues to exist, consider the next solution showcased for you.

Check for Media Corruption

One cause of the GoPro Video Export Error code, as mentioned above, is that some parts of the media may be corrupted. This corrupted portion will never allow the video to be exported. Therefore, it is mandatory first to find out if the video is corrupted. Only then can we move towards the solution of the problem.

  1. Ensure that the project video is saved with a totally different name and at another location before making the changes.
  2. Eliminate several video frames from the video project if the error starts occurring at 50%.
  3. After eliminating the video frames, preview, and save the video, if the video is exported without any error, then you have found the corrupted areas of your GoPro video.

If there is a dire need to bring back the removed bad frames of the video, you can follow the guidelines given below:

  1. Create a new project video.
  2. Add the eliminated frames of the video into that project.
  3. Save it with a new name and at an entirely different location.
  4. After that, switch to the project video to safely import the frames you just created.

Hopefully, this will get you out of the mess of Video Export Error 30. But if your video is not corrupted, then this solution won’t work for you. Move on to the next solution planned for you.

Update Graphics Card Driver

Updating the Graphics Card Driver is the magical solution to error 30. If your graphics card driver is outdated or due to some reason incompatible with the video software in use, error 30 is bound to occur. You can follow the instructions below to update the graphics card driver:

  1. Go and visit the manufacturer’s website of the graphics card.
  2. Download the latest version of drivers.

After updating, you can restart the system and check if the problem is resolved. However, if your graphics card drivers are already installed in the latest version, there will be a different reason for this error. Henceforth, hop on to the next solution designed for you.

Disable Power Saving Mode

Another workable solution to kill error 30 is disabling the power saving mode. If power saving mode is enabled on your Windows, then there are chances that the graphic processor is not working at its maximum potential.

To disable power saving mode, follow the steps below:

  1. Click on the “Start” button, located in the bottom left corner of the windows screen.
  2. From the panel that pops up, search for “Control Panel” and click on it.
  3. From there, select “Hardware and Sound” and click on the “Power” option.
  4. From there, select the “Create a Power Plan.”

The choice of this plan allows the PC to work at high performance. The disabling of Power Saving mode has proved to be an effective way to minimize GoPro error 30.

How to Repair Corrupted GoPro Video?

Do you several videos that are corrupted and require repairing? Are you looking for software that takes all your troubles away? Find no more. We have got your covered.

Repair Corrupted GoPro Video Online:

Wondershare Reparit online website can repair your corrupted GoPro video easily without any download or sign up. Just open the website, then upload the damaged GoPro video to start the online video repair process.

The Bottom Line

The article neatly covered the necessary information about GoPro Video Export Error Code 30 and discussed some of the causes of its occurrence. For you to get rid of this error, we envisaged workable and feasible solutions that are promising and will never leave you unattended.

You can update the graphics card driver, disable power saving mode, check for media corruption, check the storage space, and switch your focus to the video's export and import location. These solutions can work out if you follow all the steps precisely and do not lose your calm in the process!

Originally published at




I am specialized in picture, video, camera and SD card fixes. I ‘d love to translate complicated solutions into easy-to-understand ones.

Love podcasts or audiobooks? Learn on the go with our new app.

Recommended from Medium

NetworkPolicy Best Practices

CTF Writeup: 0x00sec CTF Exercise 03

The Struggle-bus

Build a Github webhook handler with Serverless & AWS Lambda

Whitepaper, Presale, Airdrop and whitelist

Kubernetes world

In a world built on REST, why use GraphQL?

How to run/debug your web application with IntelliJ IDEA and Tomcat

Get the Medium app

A button that says 'Download on the App Store', and if clicked it will lead you to the iOS App store
A button that says 'Get it on, Google Play', and if clicked it will lead you to the Google Play store
Eleanor Reed

Eleanor Reed

I am specialized in picture, video, camera and SD card fixes. I ‘d love to translate complicated solutions into easy-to-understand ones.

More from Medium

Nighttime Smoothie For Weight Loss- Weight Loss Smoothie Diet

Cold or Hot Shower Before Bed: Which Is Better for Sleep?

The easiest and most efficient way to lose weight

Five stars win for Jan Hirt